webleads-tracker

Your search



The star products d'I-TEK

Since its creation in 1992, I-TEK has evolved with a permanent focus on innovation. Our objective is to find the best solutions to make your farm a source of performance.

The star products
The star products I-TEk
  • 1992 : The LACTEK pen on slurry tank


    1992 : The LACTEK pen on slurry tank

    Thanks to its tank, the LACTEK pen, created by I-TEK, considerably reduces ammonia emissions and makes it possible to have a good atmosphere in the farrowing houses.

    Further, thanks to all its technical details (raised, stainless steel chassis, open cast iron grating, etc.), the structure of the I-TEK pen increases the performances at this physiological phase.

  • 1994 : Raised, stainless steel trough


    1994 : Raised, stainless steel trough

    Our feeding stations are fitted with raised, stainless steel troughs. They allow a better circulation of the air in the houses, and a better ventilation of the sow. Further, they save space.

  • 1996 : TEKILNE cast iron grate


    1996 : TEKILNE cast iron grate

    The TEKLINE cast iron grate is used to avoid dejections behind the sow and thus makes it possible to improve the cleanliness of the farrowing pens.
    In fact, the Tekline grate lets all the dejections through, for better hygiene.

  • 1997 : GEVITOP feeding station


    1997 : GEVITOP feeding station

    GEVITOP is a very comfortable sow feeding station, it is robust and accessible for the breeder. It is the feeding station the best adapted to sows awaiting insemination.
    In fact, its rounded gate facilitates the insemination of the sow, as well as vaccination and sonography.

  • 1998 : EXATOP ventilation post


    1998 : EXATOP ventilation post

    The EXATOP ventilation post makes it possible to regulate the ventilation in all your pig houses. By the distribution of posts along all the halls, EXATOP is the only process that makes it possible to have even ventilation in pig houses of a depth of up to 25 metres.

  • 2004 : FEEDING BALL feeder for farrowing


    2004 : FEEDING BALL feeder for farrowing

    2004 : FEEDING BALL feeder for farrowing


    The FEEDING BALL is a feeder system with a transparent container, that can be qualified as a "rationed self service" system that allows the sows to eat when they wish. This makes it possible to avoid the stress caused when feeding is triggered.

  • 2005 : Securilis


    2005 : Securilis

    Securilis is a kit that can be adapted to slurry evacuation. The two keywords for this system are watertight and safety. The Securilis defines a maximum level of slurry. When the slurry exceeds this level, it automatically flows into the PVC pipe and tips the hatch.

  • EXA+ ventilation system


    EXA+ ventilation system

    The EXA+ system is a centralised ventilation system, with air intake and extraction in the lower part of the building, as well as the possibility of scrubbing the air.

    This ventilation system gives a very good spread of the air around the buildings via the regulation by the EXATOP posts in the pig houses. This creates a better atmosphere and reduces the ammonium levels in the pig houses. You will have better breeding performances.

  • GEVILIB+ feeding station


    GEVILIB+ feeding station

    The GEVILIB+ is the most modular and most practical solution for your gestating sow houses, thanks to its 4 positions, its locked feeding station for vaccination, and its stall position.

    Its collective command makes it possible to control all the feeding stations at the same time. It is also possible to separate a feeding station to isolate a sow for example.
    This makes your everyday operations in the gestating sow houses much easier.

  • Liftable cast iron duck boards


    Liftable cast iron duck boards

    The liftable cast iron duck boarding is self supporting on 1 metre and articulated at its end. It also includes a wall block to fix the duck board to the walls during cleaning.

    The liftable cast iron duck board makes it possible to access the bottom of the pit quickly and easily. Through its simplicity, it makes washing easier and thus improves the sanitary aspects of your rearing houses.

  • Liftable plastic island


    Liftable plastic island

    The liftable plastic island is a liftable plastic flooring designed for rearing and farrowing fittings. It is usually placed in the centre of the pen and eases access to the pre pit for easier cleaning and a sanitary improvement of the pig house.

  • The B21 building


    The B21 building

    With the B21, I-TEK has designed the first industrial building in the field of pig farming. With a fixed and optimal width, the "B21" standard has been designed to result in an economic building both in terms of building costs and operating costs. The B21 was designed around the EXA+ low, centralised ventilation model. This building design model provides optimum ventilation for your buildings.

  • Le TEMPO FEEDER


    Le TEMPO FEEDER

    I-TEK has created the Tempo Feeder, an interval feeder which, by its simplicity of design and use, makes the widespread use of sequencing and wet feed techniques possible. Tempo Feeder uses the drinking water to supply wet feed, to impose a waiting time between two feed supplies and to sequence the feeding.

  • EXACLEAN Scraping


    EXACLEAN Scraping

    The principle behind the EXAVCLEAN concept is to keep all the advantages of the EXA+ ventilation (even distribution of fresh air, centralised extraction), while adding the advantages of the "V" scraper system in order to optimise the three fundamental principles of breeding, the hygiene aspect, well-being (the atmosphere in the rearing houses) and the environment through the treatment of slurry.

Inquiry

I agree to receive information by email ITEK.

Ces informations sont destinées à la société ITEK. En application des articles 27 et 34 de la loi "Informatique et libertés" du 6 janvier 1978, vous disposez d'un droit de modification ou de suppression des données vous concernant.Ce droit peut être exercé par courrier électronique en adressant votre demande à contact@i-tek.com.

Newsletter subscription

Ces informations sont destinées à la société ITEK. En application des articles 27 et 34 de la loi "Informatique et libertés" du 6 janvier 1978, vous disposez d'un droit de modification ou de suppression des données vous concernant.Ce droit peut être exercé par courrier électronique en adressant votre demande à contact@i-tek.com.